Test setup with a ShockLine ME7868A and a Reconfigurable Intelligent Surface
This video demonstrates the ShockLine ME7868A VNA with PhaseLync Technology and an active RIS, designed by Greenerwave. The ShockLine MS46131A modules are facing the RIS at different heights, meaning that both modules are not on the same plane. To focus the transmission towards the RIS, horn antennas are used on each module. With these conditions it is impossible to achieve any transmission measurement due to the lack of line of sight. Using the Greenerwave RIS with its beamforming capability, you can measure any incoming signal and resend it anywhere.
In All Videos
Introducing Anritsu’s New ShockLine ME7869A PhaseLync Distributed 2-Port Vector Network Analyzer
Test long cable runs across aircrafts, naval ships, large anechoic chambers, and other tasking environments, with simplicity and accuracy
Analyzing 5G Networks in Central London with Anritsu Field Master Spectrum Analyzers
This video highlights the range of measurements available to validate real-world network performance in the field
Analyzing Pulsed Radar with the Field Master Pro Spectrum Analyzer
Performing measurements on a pulsed radar
Automated Valet Parking Simulation
This video explains the required test solutions to improve Type-2 AVP reliability.
Detect the Failure Location of Optical Submarine Cables
The MW90010B is a coherent OTDR with a wavelength-tunable light source from 1,527.60 nm - 1,567.13 nm. It can accurately detect the failure location of optical submarine cables up to 20,000 km in length with a resolution of 10 m.
Testing Multiple Intermod Frequencies
Using the PIM Master to test multiple passive intermod (IM) frequencies